Finished building the jig the other day and was waiting to get the laser cut plates to start the build. Received plates and tubing this morning. This is just the lower. Hoping to have the upper built over the weekend.
3/8 plates are laser cut and installing the balljoint requires a press fit. Lots of arms out there just fall right in. We are using 1"x.188 wall DOM for the runners. The plates are bored for the runners to pass through the plate like our trailing arms. I made gussets out of a sheet of 3/8 plate and gusseted it on both sides. We added a cross brace about mid ways.
Here is the completed lower in the raw. Let me know your thoughts. Thank you, Special Carriers mfg/Clint Todd
3/8 plates are laser cut and installing the balljoint requires a press fit. Lots of arms out there just fall right in. We are using 1"x.188 wall DOM for the runners. The plates are bored for the runners to pass through the plate like our trailing arms. I made gussets out of a sheet of 3/8 plate and gusseted it on both sides. We added a cross brace about mid ways.
Here is the completed lower in the raw. Let me know your thoughts. Thank you, Special Carriers mfg/Clint Todd