Less than 5 Days Left to Save 10% on PRP Products

December 16, 2016, 11:34 am

≫ Next: [PSA] An expensive lesson in: 520226, 190, 84

≪ Previous: Red paint color name?

$

0

0

Hey guys,

Just a heads up, there is less than 5 days to save 10% on PRP Products!
Coupon Code- JingleBells
Seats | Bench Seats| Harnesses

---

[PSA] An expensive lesson in: 520226, 190, 84

December 16, 2016, 11:34 am

≫ Next: Can enclosure

≪ Previous: Less than 5 Days Left to Save 10% on PRP Products

$

0

0

Most research will tell you this error code likely means your ECU is fried. And for the most part that's true, because you get some power but it won't start. However, after a couple of weeks of worry, 2 missed riding trips before the weather turned, and a few hundred bucks later...it wasn't the ECU. Or the Voltage Regulator. It wasn't the fuse itself either believe it or not.

Long story short? Mud had prevented the fuse from making full contact. This threw me off, because I removed and reseated all the fuses, and even took out the voltmeter and went through every connection in the fuse box all looked fine - and of course the fuse itself was also fine. So on the surface it didn't look like it was the problem. Buried deep in google searches someone had a similar error and this was the fix, sure enough blowing it out thoroughly did the trick.

Attachment 359969

As pictured above, it was the 10A EFI Fuse.

The moral of the story, is to keep your box clean. :)

Attached Thumbnails

 

Can enclosure

December 16, 2016, 6:51 pm

≫ Next: Half windshield with aftermarket cage

≪ Previous: [PSA] An expensive lesson in: 520226, 190, 84

$

0

0

Who makes a good enclosure for XP 1000 that will work with plastic Polaris roof.

Half windshield with aftermarket cage

December 16, 2016, 7:25 pm

≫ Next: 2015 fox edition xp1k RZR of the Year winner! 22,500

≪ Previous: Can enclosure

$

0

0

I have a 2015 xp1k4 with a TMW Venom cage, I was wondering if your "Tinted Hard Coated -RZR XP1K and 2015-16 RZR 900 Half Windshield/ Wind Deflector"
will fit? the part that i am concerned with is, if where the clamps are will be ok with the lower bar. here is a picture of the front of the cage.

Thanks
Danny

Attached Thumbnails

 

2015 fox edition xp1k RZR of the Year winner! 22,500

December 16, 2016, 7:30 pm

≫ Next: Places to ride Berea or Mount Vernon Kentucky

≪ Previous: Half windshield with aftermarket cage

$

0

0

The build thread is on here as 'another fox edition build' has all the photos. Has shock therapy stage 3 kit done since pics were taken.


Sent from my iPhone using Tapatalk

Places to ride Berea or Mount Vernon Kentucky

December 16, 2016, 7:48 pm

≫ Next: California trail maps and MapTiler

≪ Previous: 2015 fox edition xp1k RZR of the Year winner! 22,500

$

0

0

Now dont laugh but the wife wants to go 12 hours away to go to church in Berea KY. Looking for some great riding in the vicinity. Wanting to pull toyhauler and would like to set up and be able to ride from campground 2-3 days riding. Any help would be greatly appreciated. Thanks.:tent3:

California trail maps and MapTiler

December 16, 2016, 8:24 pm

≫ Next: Xp 1000 power steering

≪ Previous: Places to ride Berea or Mount Vernon Kentucky

$

0

0

The instructions from California trail maps do not work for me.
I am trying to download California Trail Maps to MapTiler on my iPad.
It asks for an url or right click for file share via iTunes.
Nothing is where they say it should be.

Xp 1000 power steering

December 17, 2016, 6:44 am

≫ Next: XP 1000 wheel and tire take offs

≪ Previous: California trail maps and MapTiler

$

0

0

I have a power steering unit with shafts and bracket included. Unit worked great when removed. All you will have to do is plug it into wiring harness and be good to go. I will take 400.00 for all of it. Please call or text me ,that is best way to get in touch for me. 423-280-9534

---

XP 1000 wheel and tire take offs

December 17, 2016, 7:32 am

≫ Next: 2017 Titanium Matte Metallic

≪ Previous: Xp 1000 power steering

$

0

0

Looking for a set of factory wheels and tires for my XP 1000 in the Boise, Idaho area.

2017 Titanium Matte Metallic

December 17, 2016, 8:14 am

≫ Next: Rockford Fosgate Install

≪ Previous: XP 1000 wheel and tire take offs

$

0

0

Posting a pic of my friends new Turbo he got on 12/3. We both bought 1000's in July of 15 and I bought a turbo in November of 15. Can't wait to see how it does against my 16

Attached Thumbnails

 

Rockford Fosgate Install

December 17, 2016, 8:53 am

≫ Next: Would you buy these for $500

≪ Previous: 2017 Titanium Matte Metallic

$

0

0

Anyone have pictures of a double 400 amp install on a 1000 XP?

Instructions are a little vague with regards to amp location.

Installing the SSV 5 speaker system..

FST1

Would you buy these for $500

December 17, 2016, 9:19 am

≫ Next: Happy Birthday Clayton4971 (Carl )

≪ Previous: Rockford Fosgate Install

$

0

0

Found these listed on Craigslist for $500. Sti 14" beadlock rims with 30x10x14" motoclaw tires.




My question is, based on what's left of the tread, would you invest the money. I use my Ranger for work around my property where the trails are sloppy for about 6 months a year and some trail riding. Dirt, mud, some hard pack.

I appreciate the feedback.


Sent from my iPhone using Tapatalk

Happy Birthday Clayton4971 (Carl )

December 17, 2016, 9:26 am

≫ Next: RZR 570 Front Axle

≪ Previous: Would you buy these for $500

$

0

0

Happy Birthday my friend! Hope you have a great day :)

RZR 570 Front Axle

December 17, 2016, 9:57 am

≫ Next: Pro Armor Full Cab Enclosure needed

≪ Previous: Happy Birthday Clayton4971 (Carl )

$

0

0

I sold my RZR a few yr ago but still have a spare axle left over. I don't believe anything is wrong with it. Everything moves smooth, boots aren't torn.

$40 + shipping? OBO?

Located in Columbus, IN

Pro Armor Full Cab Enclosure needed

December 17, 2016, 10:16 am

≫ Next: Riding the high desert Sunday morning 11 am :)

≪ Previous: RZR 570 Front Axle

$

0

0

I am looking to buy a Pro Armor Full Cab Enclosure to replace my current one. I have a 2011 RZR 800.

PM me if you have it and I'll buy it right away.

Thanks!

---

Riding the high desert Sunday morning 11 am :)

December 17, 2016, 10:16 am

≫ Next: Assault's rear shock heat shield

≪ Previous: Pro Armor Full Cab Enclosure needed

$

0

0

Hi all riding the high desert tomorrow at 11 am , End of pavement on Southern Blvd. Rio Rancho New Mexico ,All are welcomed:)

Assault's rear shock heat shield

December 17, 2016, 10:42 am

≫ Next: Xmas light ride/parade????

≪ Previous: Riding the high desert Sunday morning 11 am :)

$

0

0

Sent from my SM-G920V using Tapatalk

Xmas light ride/parade????

December 17, 2016, 10:38 pm

≫ Next: Modified A arms 900 s 2016 to Rzr 1000 traveling arms

≪ Previous: Assault's rear shock heat shield

$

0

0

Hi all I know there was a ride organized tonight on the east side of town (Gilbert, Az) is there any plans to do a ride on the west side of town? Thanks

Modified A arms 900 s 2016 to Rzr 1000 traveling arms

December 18, 2016, 2:40 am

≫ Next: HLE will rev but will not move

≪ Previous: Xmas light ride/parade????

$

0

0

Hello

Coming a little odd question here.
But there are some who have modified A arms behind on a RZR 900 s 2016 mod to RZR 1000 traveling arms. this for better suspension

HLE will rev but will not move

December 18, 2016, 6:01 am

≫ Next: What spares to have at camp?

≪ Previous: Modified A arms 900 s 2016 to Rzr 1000 traveling arms

$

0

0

My HLE starts right up and will rev just fine, however when i put it in gear it barley moves, it almost feels like the belt is slipping very bad. the car revs up high and it moves at less then 1 mph.